Attaching equipment
IV pole
Attaching equipment to mounting plate
Example: Babylog 8000
Remove plastic foot strips from ventilator.
Tilt Babylog forward by about 45°.
1 Insert front latches into slots in mounting plate.
2 Lower Babylog, insert rear latches into slots in
mounting plate, and secure at the back with knurled
screws.
Upright Mounting Support
Attach the Upright Mounting Support with the two
included screws to the incubator base. The diameter
of the pole 1 1/2 inches.
CAUTION !
Maximum load on IV-pole must not exceed 11 lbs
(5 kg).
CAUTION !
Do not use the pole to push or pull the
incubator. Always use the hand rails.
Hinged Swivel Shelf
–
Swovel shelf for small items, up to 3 kg weight.
Attach with the bracket to the pole, teighten with hand
knob.
–
Check regularly for teightend hand knob.
Mounting Accessories
2
1
29