Fitting Accessories - Dräger 8000 IC Instructions For Use Manual

Fitting accessories

Support for ventilation hoses
Fold down front door.
Raise bed and lift out of incubator.
Push mattress to one side a little.
Push hose support into appropriate hole, right or left.
Screw knurled screws on from below and tighten.
Replace bed in the incubator and close front door.
Bronchial suction equipment
See also relevant Instructions for Use.
To mount on incubator
Screw holder to left or right end face of trolley at
front, using holes provided.
Hang bottle holder on it.
Attach ejector to rail with rail clamp.
Connect hose.
Instrument tray
(for small items)
Attach tray to rail and tighten clamp.
Maximum load must not exceed 2 kg.
Preparation
Accessories
9