Backing Up, Restoring, And Upgrading Projector Files; Upgrading The Mirage 304K Software; Adding A Software License To A Projector - Christie Mirage 304K User Manual

Backing up, restoring,
and upgrading projector
files
Learn how to back up, restore, and upgrade projector files.

Upgrading the Mirage 304K software

When a new version of the software is released, Mirage 304K must be upgraded.
1. Turn off the lamps before proceeding with the upgrade.
2. Insert a USB key that contains the software upgrade file.
If two USB flash drives are inserted, the first flash drive inserted is the one recognized for the
upgrade. The USB flash drive must be formatted using the FAT 32 file system.
The upgrade file must be located at the root of the USB key.
3. From the display panel, select MENU > Admin.
4. Select Software > Upgrade.
5. Select an upgrade file and select Enter.
6. To automatically restart Mirage 304K, select Restart Now.
If you decide restart Mirage 304K at a later date (Restart Later), you cannot perform another
upgrade until the Mirage 304K is restarted.

Adding a software license to a projector

Add the software license to the projector using the Christie Twist 2.5 or higher.
1. Record the serial number of the projector(s) and send it to Christie Technical Support.
The serial number is available on the projector label, from the Status > Configuration menu,
or you can send the (SST+CONF?1) serial API command.
Christie Technical Support will send a zipped license file to you. If you sent more than one
serial number, you will receive multiple license files as the .key file is based on the serial
number of the projector.
2. Unzip the license file to a known location on your computer.
3. Make sure the projector you want to upgrade is running and is on the same subnet as your
computer.
4. From the Start menu, select Christie > Twist 2.x > Projector License Utility.
Mirage 304K (Bm.1) User Guide
020-101778-12 Rev. 1 (04-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
52