Declaration Of Conformity; Weee Declaration; Important Notes - Esu SignalPilot 51840 Instruction Manual

Declaration of Conformity

1. Declaration of Conformity
The manufacturer, ESU electronic solutions ulm GmbH & Co. KG,
Edisonallee 29, D-89231 Neu-Ulm, hereby declares under its sole
responsibility that the product
Product name: SignalPilot
Type: 51840
complies with all relevant provisions of the Electromagnetic Com-
patibility Directive (2004/108/EC). The following harmonised stan-
dards have been applied:
EN 55014-1:2006 + A1:2009: Electromagnetic compatibility -
Requirements for household appliances, power tools and similar
electrical appliances - Part 1: Interference emission
EN 55014-2:1997 + A1:2001 + A2:2008: Electromagnetic compa-
tibility - Requirements for household appliances, power tools and
similar electrical appliances - Part 2: Immunity.

2. WEEE Declaration

Disposal of old electrical and electronic equipment (valid in the
European Union and other European countries with separate coll-
ection system).
This symbol on the product of the packaging or in
the documentation means that this product must
not be treated as household waste. Instead, this
product is to be taken to the appropriate disposal
point for recycling electrical and electronic equip-
ment. If the product is disposed of correctly, you
help to prevent negative environmental influences and damage
to health that could be caused by improper disposal. Recycling
material will preserve our natural resources. For more information
about recycling this product, please contact your local citizens'
office, household waste collection service or the store where you
purchased this product.
4

3. Important Notes

Congratulations on your purchase of an ESU SignalPilot decoder.
This manual wants to introduce you step by step to the possibilities
of the decoder. Therefore, a request:
Please carefully work through this manual before commissioning.
Although all SignalPilot decoders are very robust, a wrong con-
nection could destroy the device. If in doubt, avoid „expensive"
experiments.
• The SignalPilot is intended exclusively for use with electric model
railway systems. It may only be operated with the components
described in this manual. Any use other than that described in this
manual is not permitted.
• All connection work may only be carried out when the operating
voltage is switched off.
• The power sources must be secured in such a way that in the event
of a short circuit, there can be no cable fire. Use only commercially
available model train transformers manufactured according to the
VDE/EN, bearing the CE mark.
• Never operate the SignalPilot unattended. The SignalPilot is not
a (children's) toy.
• Follow the principles of this manual when connecting the external
components. The use of other circuitry may cause damage to the
decoder.
• The SignalPilot is not waterproof: Outdoor use is not intended and
is done at your own risk.
• Do not attempt to open your SignalPilot module. Improper treat-
ment may destroy it.