Usb Configuration - IEI Technology KINO-PVN-D5251 User Manual


Configure SATA as [IDE]
Use the Configure SATA as option to configure SATA devices as normal IDE devices.

IDE D
EFAULT

AHCI

5.3.4 USB Configuration

Use the USB Configuration menu (BIOS Menu 6) to read USB configuration information
and configure the USB settings.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
USB Configuration
USB Devices:
None
Legacy USB Support
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 6: USB Configuration

USB Devices
The USB Devices Enabled field lists the USB devices that are enabled on the system

Legacy USB Support [Enabled]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard
support. Normally if this option is not enabled, any attached USB mouse or USB keyboard
does not become available until a USB compatible operating system is fully booted with all
USB drivers loaded. When this option is enabled, any attached USB mouse or USB
keyboard can control the system even when there is no USB driver loaded onto the
system.
Page 68
KINO-PVN-D5251/D4251/ Mini ITX SBC
Configures SATA devices as normal IDE device.
Configures SATA devices as AHCI device.
[Enabled]
: Select Screen
 : Select Item
Enter Select
+/-: Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit