System Configuration; At/Atx Mode Select; Figure 4-4: Securing The M.2 Module; Table 4-1: At/Atx Mode Select Switch Settings - IEI Technology gKINO-R1000 User Manual

gKINO-V/R1000 SBC
Step 4: Push the M.2 module down and secure it with the previously removed retention
screw (Figure 4-4).

Figure 4-4: Securing the M.2 Module

4.5 System Configuration

The system configuration is controlled by buttons, jumpers and switches. The system
configuration should be performed before installation.

4.5.1 AT/ATX Mode Select

The AT/ATX mode select switch (J_ATX_AT1) specifies the systems power mode as AT
or ATX. AT/ATX mode select switch settings are shown in Table 4-1.
Setting
Short A-B
Short B-C

Table 4-1: AT/ATX Mode Select Switch Settings

The location of the AT/ATX mode select switch is shown in Figure 4-5 below.
Description
ATX Mode (Default)
AT Mode
Page 55