Viewing And Clearing The Local Log Table - Emerson PACSystems RX3i User Manual

RSTI-EP PROFINET I/O Controller User Manual
GFK-2571R
Group/
Error Code
8-5
8-6
9-3
9-4
9-7
10-1
5.8.2

Viewing and Clearing the Local Log Table

Diagnostics
Description Cause
Failure The PROFINET
occurred while experienced a failure while
processing processing
configuration. configuration.
Note:
PNIO stack The PROFINET Controller has
asynchronous experienced a generic error
response error resulting from interactions with
the PROFINET Controller stack.
Possible causes include two or
more
controller
received in the expected order.
Rejected mail The PROFINET
error. received
message from the CPU.
Mail processing The PROFINET
error on the encountered an error while
PROFINET processing mail received from
Controller. the PACSystems CPU (e.g.
PROFINET Controller received
rejected mail from CPU).
PROFINET The PROFINET Controller has
Alarm attempted to ACK/NACK a
processing PROFINET Alarm more than
error once.
Module service The PROFINET
request encountered an error trying to
processing process a Service Request from
error the CPU (e.g. a request to list all
PROFINET
network)
Recommended
Correction
Contact customer service.
Controller
a new
The PACSystems
controller that
delivered the
configuration to the
PROFINET Controller
should also log its
own unique failure
fault in the
Controller Fault
Table.
This is an informational
fault. No action is required.
messages from the
stack were not
Contact customer service.
Controller
a rejected mail
Controller None.
This is an informational
fault. No action is required.
Controller None.
devices on the
Section 5
May 2021
109