Configuring A Profinet Controller On A Lan - Emerson PACSystems RX3i User Manual

RSTI-EP PROFINET I/O Controller User Manual
GFK-2571R
Figure 36: Explore PROFINET Network from PNC001
Figure 37: Explore PROFINET Network from Embedded PROFINET Controller
3.5.1

Configuring a PROFINET Controller on a LAN

Adding the first PROFINET Controller to a project automatically creates a LAN associated
with it. For each subsequent PROFINET Controller that is added to a project, an existing LAN
can be selected, or a new LAN can be created. Opening the LAN View shows PROFINET
Controllers on their assigned LANs. (To view the LANs in the project, click Tools in the
Machine Edition toolbar, and select LAN View, or right-click.)
Figure 38: LAN View showing PROFINET Controller on LAN2
A PROFINET Controller can be moved to a different LAN by selecting the module in the
Navigator and dragging it to the target LAN. Here, the PROFINET Controller has been moved
from LAN02 (Figure 38) to LAN01 (Figure 39):
Configuration
Section 3
May 2021
56