Pacsystems Cpu Defaults - Outputs - Emerson PACSystems RX3i User Manual

RSTI-EP PROFINET I/O Controller User Manual
GFK-2571R
4.7.7

PACSystems CPU Defaults - Outputs

Outputs default when the CPU is no longer providing the data (e.g. when CPU has I/O
disabled). For I/O modules which control their own output defaults based on their
configuration, the output behavior is determined by that configuration setting. For I/O
modules which do not have such a configuration setting, the output default behavior is fixed
(typically 0). Refer to the specification for each I/O module type to determine behavior.
PROFINET System Operation
Section 4
May 2021
97