Emerson PACSystems RX3i User Manual page 120

Profinet i/o-controller
Hide thumbs Also See for PACSystems RX3i:
Table of Contents

Advertisement

RSTI-EP PROFINET I/O Controller User Manual
GFK-2571R
Group-
Error Code
11-81
11-82
11-83
11-84
Diagnostics
Description
Cause
Valid module
A module configured for
substitution
a PROFINET device does
detected.
not exactly match what is
physically present on the
device, but the device
indicates it is a valid
substitution.
Module
A module configured for
configuration
a PROFINET device does
mismatch
not match the module
during
that is physically present
configuration.
on the device.
Module
A module has been hot-
configuration
inserted into a PROFINET
mismatch
IO-Device,
detected after
physical
module hot-
detected does not match
insertion.
the configured module.
Configured SFP
SFP configured for a port
mismatch
on the PNC001 does not
detected.
match what is physically
present on the PNC001.
Recommended Correction
The module should operate
properly in the presence of this
fault. However, to eliminate the
fault, try one or more of the
following:
Make sure the module is
installed
location
necessary (PNC001 only).
Update the configuration
stored to the PROFINET
Controller to exactly match
the module present.
Replace the module on the
device
configuration.
The module will not operate
properly, therefore try one or
more of the following:
Make sure the module is
installed
location
necessary (PNC001 only).
Update the configuration
stored to the PROFINET
Controller
actual module present
Replace the module on the
device
configuration.
Either update the configuration
stored
to
and
the
Controller to match the module
module
physically present or replace the
module on the IO-Device to
match
the
EDITION configuration.
The SFP present should operate
properly in the presence of this
fault. However, to eliminate the
fault,
either
configuration to match the actual
SFP type in use, or physically
replace the SFP in use with the
type of SFP configured.
Section 5
May 2021
in
the
correct
and
move
if
to
match
the
in
the
correct
and
move
if
to equal
the
to
match
the
PROFINET
PAC
MACHINE
update
the
113

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pacsystems rsti-ep

Table of Contents