Emerson PACSystems RX3i User Manual page 85

RSTI-EP PROFINET I/O Controller User Manual
GFK-2571R
Figure 76: Third-Party I/O: Select Ring Ports for Media Redundancy Client
If the IO-Device will be a Media Redundancy Manager, edit the Ring Port settings as above.
You can also change the Default Test Interval in the range of 1 to 1000ms and the Test
Monitoring Count (2 to 10). For the Media Redundancy Manager, the Domain Name can be
edited by typing over the default name.
Figure 77: Third-Party I/O: Configure Ring Ports for Media Redundancy Manager
IO-Device Parameters (Device Parameters Tab)
Additional Device Parameters tabs can be used to select additional device options, as
defined by the device manufacturer. Note: The exact names of the tabs and parameters are
derived from manufacturer specific information contained in the associated GSDML file. For
example:
Figure 78: Third-Party I/O: Additional Parameter Settings (Product Dependent)
IO-Device Parameters (GSDML Details Tab)
The GSDML Details tab displays the device's GSDML parameters, which cannot be edited.
Configuration
Section 3
May 2021
78