Configuration; Configuration Overview - Emerson PACSystems RX3i User Manual

RSTI-EP PROFINET I/O Controller User Manual
GFK-2571R
Section 3:
This Section explains how to configure an RX3i PROFINET Controller and its IO devices in a
PACSystems RX3i controller system. Additional information about RX3i configuration is
available in other PACSystems documentation and in the Logic Developer online help.
This Section discusses the following topics:
•

Configuration Overview

• Configuration Tools
• Configuring an RX3i PROFINET Controller
• Configuring PROFINET LANs
• Adding a VersaMax PROFINET Scanner to a LAN
• Adding a Third-Party IO-Device to a LAN
• Viewing / Editing IO-Device Properties
• Assigning IO-Device Names
• Configuring IO-Devices
• After the Configuration is Stored to the RX3i CPU
3.1 Configuration Overview
The PAC Machine Edition PLC Logic Developer programmer is used to create and download
the configuration for an RX3i PROFINET network and its devices.

Configuration

Configuration
Basic Configuration Steps
-
The PROFINET Controller's LAN
-
Configuring PROFINET Controller Parameters
-
Configuring the LAN Properties
-
Configuring VersaMax PNS Parameters
-
Adding VersaMax PNS Power Supplies
-
Adding VersaMax Modules to a Remote Node
-
- Adding Power Supplies Between Modules
- Configuring VersaMax Module Parameters
Configuring Analog Modules that have Jumpers
-
Editing Third-Party IO-Device Parameters
-
- Configuring Sub-modules of an IO-Device
Configuring the RX3i Controller Configuration
-
Section 3
May 2021
48