Emerson PACSystems RX3i User Manual page 52

RSTI-EP PROFINET I/O Controller User Manual
GFK-2571R
Revision -Bxxx:
Port Number LED (Note: here the digit representing the port number is backlit by the
corresponding LED).
1000 Speed LED (individual LED for each port)
100 Speed LED (individual LED for each port)
10 Speed LED (individual LED for each port)
Revision -Ax:
LEDs marked 1,2,3,4 behave as follows:
Installation
Red, ON Port 3 and 4 only: Error such as incompatible SFP.
OFF No Port errors.
Green, ON Link connected, 1000 Mbps
Green blinking Port active, 1000 Mbps
The associated Ethernet port is not connected to an active link at
OFF
1000Mbps
Green, ON Link connected, 100 Mbps.
Green, blinking Port active, 100 Mbps
The associated Ethernet port is not connected to an active link at
OFF
100Mbps
Green, ON Link connected, 10 Mbps.
Green, blinking Port active, 10 Mbps
The associated Ethernet port is not connected to an active link at
OFF
10Mbps
Blue, ON Link connected, 1000 Mbps
Blue, blinking Port active, 1000 Mbps
Green, ON Link connected, 100 Mbps
Green, blinking Port active, 100 Mbps
Purple, ON Link connected, 10 Mbps
Purple, Port active, 10 Mbps
blinking
Fatal error. Flashes once between error codes blinked on the OK LED
Green, blink
pattern
OFF The associated Ethernet port is not connected to an active link
Red, ON Port 3 and port 4 only. Incompatible SFP plugged into port.
Section 2
May 2021
45