RSTI-EP PROFINET I/O Controller User Manual
GFK-2571R
Section 6:
The PACSystems PROFINET Controller supports PROFINET Media Redundancy Protocol
(MRP). The PROFINET Controller can be used as either a Media Redundancy Manager or
Media Redundancy Client on a redundant media ring.
Media Redundancy enables the network to recover from a failure at any single network link
or network node. Because it operates transparently to applications using the network, no
changes to the application are needed to use media redundancy.
This Section describes:
•
PROFINET Media Redundancy Protocol
•
MRP Performance
•
Ring Topology with One Controller
•
Ring Topology with Multiple Controllers
•
Setting Up Media Redundancy Protocol for a PROFINET IO-Controller
•
Sequence for Enabling Media Redundancy
•
Sequence for Replacing a Media Redundancy Manager
•
Procedure for Disabling Media Redundancy
The following table shows which PROFINET Scanners/Devices support MRP.
PROFINET Scanner/Device
RX3i CEP Carrier
RX3i Genius
PAC8000 PROFINET Scanner (PNS) Module
RSTi PROFINET Network Adaptor
RSTi-EP PROFINET Network Adaptor
RX3i PROFINET Scanner (PNS) Module
VersaMax PROFINET Scanner (PNS) Module
VersaMax IP PROFINET Scanner Module
VersaPoint PROFINET Scanner
16
Bumpless operation is only guaranteed at IO Update rates at or above 128 ms
Redundant Media
Redundant Media
TM
Communications Gateway
Acronym
PROFINET Media
Redundancy Protocol
(MRP)
RX3i CEP
√
RX3i GCG
√
PAC8000 PNS
√
RSTi PNS
RSTi-EP PNS
√
RX3i PNS
√
Versamax PNS
√
VersaMax/IP PNS
√
16
VersaPoint PNS
√
Section 6
May 2021
131