Configuring Versamax Profinet Scanner Parameters - Emerson PACSystems RX3i User Manual

RSTI-EP PROFINET I/O Controller User Manual
GFK-2571R
In the PROFINET Device Catalog, expand the VersaMax PNS line and choose the module
type:
Figure 52: Select PNS Type
Select the PNS type and click OK. The PNS appears in the Navigator window:
Figure 53: PNS Attached to PNC001 in PAC MACHINE EDITION Navigator
3.7.1

Configuring VersaMax PROFINET Scanner Parameters

After adding a VersaMax PNS to the LAN, its parameters can be configured by either double-
clicking on the Scanner in the Navigator, or right-clicking and selecting Configure from the
menu.
Figure 54: Select PNS for Parameter Configuration
Configuration
Section 3
May 2021
64