Folder - GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual

7.6.3. Folder

The length of the items is controlled by one or three proximity sensors: located at the linen feeding tray and at
the input to the folder.
Optionally, in models with two feeding lanes, there are triple the number of linen sensors (three at the feed tray
and three at the input to the folder.
See the graphs below for the distribution and length of the folds depending on the folding mode selected and
the length of the item to be folded. The graphs included in this section indicate the definition.
Explanation of the graphs
Horizontal axis
Vertical axis
Sloping lines
Graphs
Advanced manual mode
The user must enter the length of the part to be folded using the control panel keyboard.
Alternatively, the ironer control can measure and memorise the length of the part to be folded.
Once the length of the item has been determined, the user can set the number of folds.
In the example in Advanced Manual mode, the user can select different numbers of folds for the same total
length of the item.
This allows different folding lengths to be obtained.
Example of the distribution of folds in Advanced Manual mode.
Distribution and length of the folds for an item with a total length of 310 cm (122.0 in.).
Number of
folds
Manual mode
The user must enter the length of the part to be folded using the control panel keyboard.
Alternatively, the ironer control can measure and memorise the length of the part to be folded.
The number and length of the folds is determined by the total length of the item.
Automatic mode
The machine measures the length of the article to be folded and automatically determines the number of
possible folds. The length of each fold is determined by the total length of the item.
Operating and use. Inteli Control
: Length of the item to be folded (double scale in centimetres and inches).
: Length of the folds (double scale in centimetres and inches).
: Depending on the folding mode selected, they indicate the resulting length of each
fold (double scale in milimetres and inches).
: The figure accompanying this icon indicates the number of folds.
Length of the folds
cm
12 26 / 27
10 31 / 32
8 39 / 40
in.
10.2 / 10.6
12.2 / 12.6
15.4 / 15.7
96
Code no. 550038
Rev. no. 16/1018