Maintenance - GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual

13. MAINTENANCE

DANGER!
CARRY OUT ALL THE INSPECTIONS AND TESTS REQUIRED BY THE EXISTING LEGISLATION
CONCERNING GAS AND STEAM DEVICES IN FORCE IN THE COUNTRY OR AREA IN WHICH THE
MACHINE IS TO BE USED, AT THE FREQUENCY DETERMINED BY THE AFOREMENTIONED
LEGISLATION.
BEFORE MANIPULATING ANY OF THE MECHANISMS OF THE MACHINE, ENSURE THAT:
 THE AUTOMATIC EXTERNAL SWITCH IS DISCONNECTED.
 THE MACHINE'S ISOLATOR SWITCH IS MECHANICALLY LOCKED (IF NECESSARY, REMOVE THE
RIGHT-HAND SIDE COVER ON MACHINES WITH ELECTRICAL HEATING. THE SWITCH MUST BE IN
THE "0" POSITION).
 THE MANUAL GAS SUPPLY VALVE IS CLOSED AND LOCKED (machines with gas heating).
 THE MANUAL STEAM SUPPLY VALVE IS CLOSED AND LOCKED (machines with steam heating).
 THERE ARE NO PARTS IN MOVEMENT DUE TO INERTIA.
 THE MACHINE IS COLD THROUGHOUT.
ONCE ANY MAINTENANCE OPERATION HAS ENDED:
 FIT ALL THE COVERS ON THE MACHINE.
 CONNECT THE ENERGY SOURCES.
START AN IRONING PROGRAM AND CHECK THAT THE MACHINE IS FUNCTIONING PROPERLY.
CAUTION!
FOLLOW THE INSTRUCTIONS PROVIDED. DOING SO WILL ENSURE AN EXCELLENT SERVICE,
REDUCE THE LIKELIHOOD OF FAULTS AND EXTEND THE LIFE OF THE IRONER.
USERS SHOULD REFRAIN FROM MAKING ANY MANIPULATIONS NOT DESCRIBED IN THE PERIODIC
MAINTENANCE PROGRAMME OR WHICH ARE THE RESPONSIBILITY OF THE AUTHORISED
TECHNICAL SERVICE OR CUSTOMER TECHNICAL SERVICE (CTS).
THERE IS A MANUAL FOR MAINTENANCE OPERATIONS TO BE CARRIED OUT BY THE AUTHORISED
TECHNICAL SERVICE.
DANGER!
FLUFF AND SOOT ARE HIGHLY FLAMMABLE SUBSTANCES.
IT IS ESSENTIAL TO AVOID THESE BUILDING UP INSIDE THE MACHINE AND THE EXHAUST DUCTING
WHICH GOES FROM THE MACHINE TO THE OUTSIDE.
TO ACHIEVE THIS, ALL THE PLACES LIKELY TO COLLECT FLUFF AND SOOT MUST BE REGULARLY
CLEANED (E.G.: ROLL, BASE FRAMES, COVERS, EXHAUST DUCTING, FILTER, FAN, ETC.).
REGULARLY APPLYING THE MAINTENANCE AND CLEANING PLAN SET OUT IN THE NEXT CHAPTER.
IN THE CASE OF MACHINERY OPERATING IN ESPECIALLY DIRTY CONDITIONS, IT IS ESSENTIAL TO
CLEAN MORE FREQUENTLY.
ALSO KEEP THE AREA AROUND THE MACHINE FREE OF FLUFF.
Maintenance
136
Code no. 550038
Rev. no. 16/1018