Possible Operational Anomalies - GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual

13.7. Possible operational anomalies

ANOMALY
ROLL ENCRUSTATIONS
IRONED LINEN
MOISTURE TOO HIGH
LINEN ROLLING UP ON
THE ROLL
INCORRECT SPEED ON
THE ROLL MOTOR
TOO RED FLAME (GAS
VERSION)
THE BURNER CAN NOT
BE IGNITED (GAS
VERSION)
POOR FLAME SPREAD
(GAS VERSION)
LINES ON THE LINEN
FAULTY LINEN FOLDING
Maintenance
PROBABLE CAUSE
Laundry excessively mineralised
Incorrect use of washing products
Delicate laundry pieces ironed at too
high a temperature or insufficient
speed
Excessive residual damp in the fabrics
being ironed
Excessive ironing speed
Temperature defect
Dirt in the detachment springs
Low pressure in the detachment
springs
Laundry insufficiently rinsed
Static electricity
Inverter breakdown
Fault on the encoder
Deficient gas supply
Faulty air intake filter
Manual gas flow valve closed
Deficient gas supply
Gas ignition system defective or
ignition electrodes misplaced
Deficient gas supply
Blocked burner holes
Ironed linen moisture too high
Laundry introduced incorrectly
Faulty length selection
Static electricity
ACTION
Adjust the washing process.
Adjust temperature and speed to
the fabric type.
Modify the extract process.
Reduce speed.
Raise temperature.
Clean springs.
Call the ATS.
Adjust the washing process.
Add anti-static products to wash
process.
Check the machine's
connection.
Call the ATS.
Call the ATS.
Correct supply.
Clean filter.
Open manual gas flow valve.
Correct supply.
Call the ATS.
Correct supply.
Call the ATS.
Adjust speed or temperature.
Stretch laundry pieces as they are
being introduced.
Check the selection
Add anti-static products to wash
process.
Check the machine's
connection.
143
earth
earth
Code no. 550038
Rev. no. 16/1018