Text Messages - GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual

7.7.3. Text messages

This menu allows writing three text messages and determining when they appear after a number of hours
programmed.
Programming messages and moment of display
Access to the TEXT MESSAGES menu following the steps indicated in section 7.7.
The three text messages available appear on the screen.
An asterisk next to some of the messages indicates that the message is programmed.
Select one of the three messages and confirm the selection by the SEL key on the multi-function keyboard. The
following screen appears.
In the position PROGRAMMED TIME, programme time the message has to appear using the numeric keyboard.
In the position ACCUMULATED TIME will appear the time elapsed since the message was programmed.
Press the ▼ key and access to the text line. Enter the text of the message. Follow the indications for text writing
in section 7.6.2.
Register in the memory the programming and start the time counting by pressing the key.
Other actions:

The RESET key on the multi-function keyboard re-initialises ACCUMULATED time counting.

If you don't want the message to appear, erase the programming of the message duration by programming
00000 in the position PROGRAMMED TIME.

Erase the programmed message by key C on the numeric keyboard.
Operating and use. Inteli Control
106
Code no. 550038
Rev. no. 16/1018