Table of Contents
Advertisement
5. INSTRUCTIONS FOR CONNECTING THE MACHINE
5.1. Electrical requirements
CAUTION!
THE ELECTRICAL WIRING EXTERNAL TO THE MACHINE, ITS CONNECTION TO THE MACHINE AND
SUBSEQUENT ADJUSTMENTS MUST BE CARRIED OUT BY A REGISTERED INSTALLATION
CONTRACTOR.
ALL THE MATERIALS USED IN THE ELECTRIC WIRING AS WELL AS ITS INSTALLATION MUST
COMPLY WITH THE LEGALLY APPROVED REGULATIONS CURRENTLY IN FORCE IN THE COUNTRY
OR ZONE IN WHICH THE MACHINE IS BEING USED.
ALL THE INSPECTIONS AND TESTS CONCERNING ELECTRICAL WIRINGS MUST BE CARRIED IN
ACCORDANCE WITH THE REGULATIONS CURRENTLY IN FORCE IN THE COUNTRY OR ZONE IN
WHICH THE MACHINE IS BEING USED.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, THE GROUND SHOULD BE CHECKED BY A
QUALIFIED TECHNICIAN. INADEQUATELY GROUND INSTALLATION CAN CREATE A RISK OF
ELECTRIC SHOCK.
CAUTION!
CHECK THAT THE VOLTAGE AND FREQUENCY ON THE MACHINE'S SPECIFICATION NAMEPLATE
CORRESPOND TO THE MAINS VOLTAGE AND FREQUENCY.
THE VOLTAGE OF THE MACHINE'S CONTROL CIRCUIT IS 230 V AC.
CHECK THE DIRECTION OF ROTATION OF THE MOTOR AND EXTRACTOR.
CAUTION!
SPECIFIC WARNING FOR CE CERTIFIED, ELECTRIC HEATED, PB/PBP51 MODELS.
THE SUPPLY NETWORK IMPEDANCE OF THIS MACHINE MUST BE LOWER THAN (0.225+j0.140) OHMS
(Standard EN61000-3-11:2000).
CAUTION!
SPECIFIC CAUTION FOR USA/CANADA MACHINES
THIS APPLIANCE MUST BE CONNECTED TO A GROUNDED METAL, PERMANENT WIRING SYSTEM BY
MEANS OF A GROUND CABLE CONNECTED TO THE EQUIPMENT GROUNDING TERMINAL OF THE
APPLIANCE.
Steps for the connection
55
Code no. 550038
Rev. no. 16/1018
Hide quick links:
Advertisement
Table of Contents
