GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual page 127

Remove the top cover securing screws A and lift the cover
upwards (Fig. 11.7)
Remove the hand guard securing screws. The screws are
located at the ends of this component. (Fig. 11.8)
Separate the machine's hand guard by pushing it upwards.
Pull the pressing roll towards the front of the machine to
reduce the pressure on the ironing roller. (Fig. 11.9)
Releasing a person trapped
127
Fig. 11.7
Fig. 11.8
Fig. 11.9
Code no. 550038
Rev. no. 16/1018