Reception Storage And Transport; Receipt; Storage - GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual

2. RECEPTION STORAGE AND TRANSPORT

2.1. Receipt

The nameplate is located on the rear of the machine. (Fig. 2.1).
Upon delivery inspect the ironer:

Check that the product has not suffered any damage in
transit. (Any damage caused in this way will not be
attributable to the manufacturer, and the appropriate claim
should be made against the party responsible for
transporting the product.).

The data on the delivered machine's specification
nameplate complies with the requirements stipulated in
the order: MODEL, VOLTAGE, FREQUENCY AND TYPE
OF HEATING.

2.2. Storage

To store the machine, keep in mind the following points:

Do not stack machines, even though they are crated.

Never store the machine where it will be exposed to the weather.

Store the machine in moisture free location (oxidation could appear on the roll).

Apply anti-corrosion protection if they are stored and exposed to maritime humidity.
Reception, storage and transport
22
Fig. 2.1
Code no. 550038
Rev. no. 16/1018