11. FREEING A TRAPPED PERSON
The ironer's linen feeder is designed to prevent access to the ironing rollers.
FOR SAFE USE OF THE IRONER IT IS ESSENTIAL TO MAKE SURE THE SAFETY GUARDS
ARE WORKING PROPERLY.
For this reason:
NEVER START THE MACHINE UP OR USE IT UNTIL ALL THE COVERS HAVE BEEN
REPLACED AND PROPERLY LOCKED.
CHECK THE HAND PROTECTION DEVICE ON A DAILY BASIS.
USE THE PERSONAL PROTECTION EQUIPMENT DESCRIBED IN CHAPTER 9.
PROCEDURE IN THE EVENT OF ENTRAPMENT OF A PERSON OR AN ANIMAL BY
THE IRONER
11.1. PB32, X13 model
1. Press the EMERGENCY STOP button.
2. Disconnect the switch breaker from the machine's
power supply.
3. Remove the two screws (A, Fig. 11.1) securing the
ironer's front cover (one at each end of the cover).
4. Move the bar activating the release mechanism in the
direction of the arrow (Fig. 11.2). The pressure roller will
move and reduce the tension of the ironing straps.
Releasing a person trapped
124
Fig. 11.1
Fig. 11.2
Code no. 550038
Rev. no. 16/1018