Programming Mode; Access To Programming Mode - GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual

7.6. Programming mode

The ironer control is capable of storing up to a maximum of 50 programs.
Program number 1 is pre-set at source and cannot be changed.
The remaining programs are empty of content.

7.6.1. Access to programming mode

On the main menu screen, select the
PROGRAMMING MODE icon.
Press the OK key. The following screen
appears.
PROGRAMMING MODE options:
A. Programming a new program (Section
7.6.2.).
Specific information of folding modes
(Section 7.6.3).
B. Modification tools (Section 7.6.4.).
Operating and use. Inteli Control
93
Code no. 550038
Rev. no. 16/1018