Gas Connection - GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual

5.2. Gas connection

(for machines with gas heating)
CAUTION!
THE INSTALLATION OF THE GAS SUPPLY EXTERNAL TO THE MACHINE, ITS CONNECTION TO THE
MACHINE AND SUBSEQUENT ADJUSTMENTS MUST BE CARRIED OUT BY A REGISTERED
INSTALLATION CONTRACTOR.
ALL THE MATERIALS USED IN THE INSTALLATION AS WELL MUST COMPLY WITH THE LEGALLY
APPROVED REGULATIONS CURRENTLY IN FORCE IN THE COUNTRY OR ZONE IN WHICH THE
MACHINE IS BEING USED.
ALL THE INSPECTIONS AND CHECKS MUST BE CARRIED OUT ON GAS APPLIANCES DEMANDED
BY THE REGULATIONS CURRENTLY IN FORCE IN THE COUNTRY OR ZONE IN WHICH THE
MACHINE IS TO BE USED.
THE VENTILATION ON THE PREMISES MUST COMPLY WITH THE REGULATIONS CURRENTLY IN
FORCE IN THE COUNTRY IN WHICH THE MACHINE IS TO BE INSTALLED AND MUST BE APPROVED
BY A COMPETENT TECHNICIAN.
THIS IRONER MUST NOT BE INSTALLED IN PREMISES WITHOUT ADEQUATE VENTILATION.
INADEQUATELY VENTILATED PREMISES CAN SERIOUSLY AFFECT THE PEOPLE'S HEALTH.
CAUTION!
BEFORE CONNECTING THE MACHINE TO THE GAS PIPE CHECK THE TYPE OF GAS AND THE
PRESSURE SUPPLIED CORRESPOND TO THOSE DETAILED ON THE IRONER SPECIFICATIONS
NAMEPLATE.
BEFORE CONNECTING THE MACHINE TO THE GAS PIPE, CLEAN THE PIPES OF SOLID PARTICLES.
INSTALL A MANUAL ESCAPE VALVE IN AN ACCESSIBLE PLACE WITH AN AUTOMATIC SHUT OFF.
THE PIPE BETWEEN THE MANUAL ESCAPE VALVE AND THE MACHINE MUST BE RIGID.
ALWAYS SEAL THE THREADED JOINTS USING PRODUCTS SUITED TO THE GASES BEING USED.
CHECK THE ENTIRE INSTALLATION TO BE WATERTIGHT BEFORE OPENING THE ESCAPE VALVE.
CAREFULLY CLEAN AND MAINTAIN ALL THE FILTERS. POOR FILTERING REDUCES THE FLOW
AND PERMITS THE ACCESS OF FOREIGN MATERIALS INSIDE THE DEVICES, BLOCKING ITS
OPERATION.
TO IMPROVE SAFETY IN GAS INSTALLATIONS IT IS ESSENTIAL TO INSTALL A GAS LEAK
DETECTOR NEAR TO THE MACHINE.
Steps for the connection
60
Code no. 550038
Rev. no. 16/1018