Modifying The Contents Of Programs. Menu Pro - GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual

8.5.3. Modifying the contents of programs. Menu Pro

The ironer allows for ten ironing programs with pre-recorded content.
The content of all programs is initially the same.
Initial program content
PARAMETER
SPEED CONTROL
ROLL SPEED
IRONING TEMPERATURE
However, the content of each program can be modified to adapt it to the different ironing applications.
Program modification sequence
Access the ADVANCED MODE of use (Section 8.5.1). The display shows Pro.
Press the key to access the program modification menu.
The display shows Pr-1. Ready to modify Program 1. The
program. Press the
Roll speed control
This allows the user to select the speed control mode.
OPTIONS MEANING
MAn
This keeps the programmed speed unchanged
The roll speed is automatically adjusted to ensure optimum
AuTo
ironing
The keys allow the desired option to be selected.
The key validates the displayed selection and allows the user to access to the following programmable
function.
Roll rotation time in seconds
This allows the user to select the roll rotation speed.
OPTIONS MEANING
M 1.0 – 5.0
Programmable speed range in HS models
Ft 4 – 41
M 1.0 – 11.0
Programmable speed range in MS models
Ft 4 – 36
The keys allow the desired speed to be selected.
The key validates the displayed selection and allows the user to access to the following programmable
function.
Operating and use. Logi Control
GENERAL
CONFIGURATION
MANUAL
5.0 m/min
160ºC
key to access the modification of the displayed program.
USA
CONFIGURATION
MANUAL
16 Ft/min
320ºF
keys allow the user to select an other
115
Code no. 550038
Rev. no. 16/1018