Etl Certified Models - GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual

5.3.2. ETL certified models

Gas type change label
THIS EQUIPMENT WAS CONVERTED ON (DAY-MONTH-YEAR)............(1)...........
TO......(2).......... GAS WITH KIT Nº ....(3)......BY............(4).....................
CETTE APPAREIL A ÉTÉ CONVERTI LE (ANNÉ-MOIS-JOUR)...............(1)...........
POUR FONCTIONER AU GAZ................(2).............. À L'AIDE DE LA TROUSSE
Nº.........(3).........PAR.................................(4)...............................................
(name and address of organization making this conversion, who accepted the
responsibility for the correctness of this conversion)
(nom et adresse de l'organisme qui a effectué la conversion, qui accepte l'entière
responsabilité de la qualité de la conversion)
SUPPLY PRESSURE............................ (5)
PRESSION D'ALIMENTATION
MANIFOLD PRESSURE........................ (6)
PRESSION A LA TUBULURE D'ALIMENTATION
INPUT RATE....................................... (7)
DEBIT CALORIFIQUE
ORIFICE (DIAMETER)........................... (8)
INJECTEUR (DIAMETRE)
Gas type change label fields
(1) Date of the change
(2) Type of gas the ironer is to be changed to
(3) Code of the gas change kit.
(4) Organisation, company or ATS that has carried out the change.
(5) Gas supply pressure
(6) Solenoid valve output pressure (natural gas only)
(7) Nominal calorie consumption with regard to Hi (Net).
(8) Injector diameter.
Refer to the machine's parts list for the codes of the various conversion kits.
See Section 4.4 for values of fields 5, 6, 7, and 8.
Steps for the connection
inch.w.c
...................................
inch.w.c
...................................
BTU/h
...................................
mm
...................................
64
Code no. 550038
Rev. no. 16/1018