Cleaning The Extraction Filter - GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual

13.2. Cleaning the extraction filter

CAUTION! Operation to be performed by the user or by the customer's technical service
Clean the exhaust ducting filter on a WEEKLY basis.
CAUTION
Never perform this operation without having disconnected the power supply.
Before performing this procedure, make sure the temperature of the machine does not present any risk for
handling.
CAUTION!
A dirty extraction duct filter makes it difficult for the air to be extracted and reduces the performance of
the ironer.
Steps for cleaning the filter (Fig. 13.1).
 Turn off the isolator switch controlling the power supply to
the machine.
 Remove the screw (A) securing the filter to the back cover.
 Pull on the filter handle.
 Remove the lint and grime with a brush or by blowing with
compressed air.
 Refit the filter into the guide and push in right up to the
stop.
 Secure to the back cover with the screw.
 Connect the power supply for the washing machine.
Maintenance
138
Fig. 13.1
Code no. 550038
Rev. no. 16/1018