GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual page 58

Model PB32, X13 with electric heating (Fig. 5.3)
Connect to terminals L1, L2 and L3 of the isolator switch.
(See the wiring diagrams in section 4.2).
Connect the earth wire (PE/GND).
PB/PBP51, X20
Insert the power cable through the hole into the right-hand
base-frame (Fig. 5.4).
Steps for the connection
58
Fig. 5.3
Fig. 5.4
Code no. 550038
Rev. no. 16/1018