GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual page 119

Unit of linear speed
This allows the user to select the unit in which the linear speed of the roll is displayed.
OPTIONS MEANING
M Linear speed in metres per minute
Ft Linear speed in feet per minute
The key allows the user to modify the option displayed.
The key validates the selection on the display and allows the user to access the following programmable
function.
Buzzer
This allows the user to activate or deactivate the buzzer.
OPTIONS MEANING
b- - 0
No buzzer
b- - Y Yes, buzzer
The key allows the user to modify the option displayed.
The key validates the selection on the display and allows the user to access the following programmable
function.
Network identifier
This parameter assigns a network identifier to the ironer. This identifier enables the communication of the ironer
with the environment through a protocol based on RS-485.
Selected option by default: Id-0.
OPTIONS MEANING
Id-0 Disabled communication
Id-1..99 Enabled communication
For further information, see the Communication Protocol Instruction Manual.
The key allows the user to modify the option displayed.
The key validates the displayed selection and allows the user to access to the Mod menu.
Operating and use. Logi Control
119
Code no. 550038
Rev. no. 16/1018