Removal Of The Protective Guards - GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual

13.5. Removal of the protective guards

In accordance with safety directives, all electrical devices, mechanisms subjected to high temperatures (except
in the collection of laundry), are to be protected by safety guards (covers) to prevent accidental contact with the
same.
DANGER!
REMOVING ANY SAFETY GUARD FROM THE IRONER IS AN ACTION EXCLUSIVELY RESERVED FOR
THE CUSTOMER'S TECHNICAL SERVICES (CTS) OR AUTHORISED TECHNICAL SERVICES (ATS).
THIS MUST NEVER BE ONE BY THE MACHINE OPERATOR.
BEFORE PROCEEDING WITH THE REMOVAL OF ANY SAFETY GUARD THE PRECAUTIONS
INDICATED AT THE BEGINNING OF THIS MANUAL AND IN THE PRESENT CHAPTER MUST BE
OBSERVED.
ONCE THE OPERATION THAT HAS LED TO THE REMOVAL OF THE PROTECTIVE COVERS HAS
FINISHED, DO NOT RESTART THE MACHINE WITHOUT REFITTING AND SECURING ALL THE
COVERS PROPERLY.
NEVER START OR USE THE MACHINE IF ANY OF THE FOLLOWING ARE MISSING, INCORRECTLY
POSITIONED OR MALFUNCTIONING:

COVERS

SAFETY DEVICES

CONTROL ELEMENTS.
Maintenance
141
Code no. 550038
Rev. no. 16/1018