Releasing The Pressure Roller - GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual

11.2.2. Releasing the pressure roller

If the pressure roller needs to be released, follow the steps
described below:
Remove the ironer's rear covers by removing the securing
screws: four screws on the right side (A, Figure 11.5) and
four on the left side.
Support the tensioner roller to reduce the tension of the
ironing straps (Fig. 11.6)
Another option is to remove it from the machine by sliding it
to one side.
Releasing a person trapped
126
Fig. 11.5
Fig. 11.6
Code no. 550038
Rev. no. 16/1018