GIRBAU PB32 Series Installation, Operation And Maintenance Instructions Manual page 104

Setting the clock
This menu permits setting the clock.
Access the set clock menu. The following parameters appear:
MINUTE .................................. nn
HOUR ..................................... nn
DAY WEEK ................... _ _ _ _ _
DAY MONTH .......................... nn
MONTH .................................. nn
YEAR ..................................... .nn
Managing access codes
Access to the
CONFIGURATION menus can be protected using an
eight digit security code.
To access protected menus, the user must enter the
code by pressing the keys on the ironer control panel
that correspond to the adjoining images.
The initial code is 1 2 3 4 1 2 3 4.
The user can change it and introduce a new code.
Menu access protection
Access the MANAGING ACCESS CODES menu.
Distinct option appear:
PROGRAMMING Menu. The MOD key activates or deactivates the menu access protection.
CONFIGURATION Menu. The MOD key activates or deactivates the menu access protection.
The √ symbol indicates that access to the menu is protected by a code.
Change the ACCESS CODE
Select the option and access to the option using the MOD key.
The message ENTER NEW CODE will appear. Insert a new eight-digit code using the keys on the ironer's
control panel.
The MOD key memorizes the new code.
The  key allows quitting the option without modifying the code.
The initial value of the access code can be restored by means of the specific order in the SETUP menu. Consult
the Authorised Technical Services.
PID control for the temperature
This menu is reserved exclusively for the Authorised Technical Service. Do not modify the parameters
of this menu.
Operating and use. Inteli Control
Modify the value of each parameter using the MOD key.
Access to the next parameter or going to the previous menu confirms the
selection.
The numerical values must be formed with two digits. Example:
third day of the month ........ 03

month of November ........... 11

year 2010: .......................... 10

PROGRAMMING and
KEYBOARD SYMBOLS
104
NUMERICAL
EQUIVALENCE
Code no. 550038
Rev. no. 16/1018