Labrie Top Select Maintenance Manual page 59

Top Select Maintenance Guide
A
LWAYS TURN OFF THE ENGINE AND THE HYDRAULIC SYSTEM WHEN PERFORMING TASKS ON
.
THE ROOF
A
LWAYS INSTALL THE BUCKET SAFETY PIN WHEN THE BUCKET IS RAISED AND YOU OPERATE
THE CYLINDER ADJUSTMENTS
D
O NOT FORGET TO REMOVE THE BUCKET SAFETY PINS WHEN YOU NEED TO TEST THE
CYLINDERS BY MOVING THE BUCKET
If overdone, turn the holding valve adjustment screw
•
4. Raise the loading bucket to assess the necessary amount of cushion at the upper
end.
5. Lower the loading bucket to assess the necessary amount of cushion at the lower
end.
6. Lift the loading bucket all the way up to gain access to the cylinder.
7. With the bucket fully raised, install the safety pins. See
8. If adjusment is needed on the upper end:
On the cylinder, locate the adjustment screw near the head.
•
1-54
DANGER
DANGER
.
CAUTION
.
¼
turn CW and test again.
section 1.3.7 on page
Top Select Maintenance Manual
14.