Maximizer General Maintenance
2.2
Maximizer General Maintenance
The Top Select's Maximizer packing has a heavy-duty guiding system using
high-strength steel wear plates. Labrie recommends that a visual inspection of the
Maximizer and its components to be performed daily by the operator. A weekly
inspection and maintenance done by maintenance personnel is also mandatory.
Greasing all moving parts on a daily basis is very important and the proper adjustment of
the limit switches is imperative. Refer to the "Lubrication" section for detailed diagrams of
greasing points and lubrication schedule.
DO NOT GREASE THE SIDE RAILS: abrasive material sticks to the grease and can
cause premature wear of the rollers and/or the side rails.
Any problems found on the packing system must be corrected immediately.
A
L
PPLY THE
OCKOUT
IS PERFORMED ON THE VEHICLE
Top Select Maintenance Manual
/T
AGOUT PROCEDURE AT ALL TIMES WHEN MAINTENANCE OR INSPECTION
.
DANGER
2-5
Need help?
Do you have a question about the Top Select and is the answer not in the manual?
Questions and answers