Adjusting The Loading Bucket Cylinder Cushion - Labrie Top Select Maintenance Manual

Top Select Maintenance Guide
4. On the side facing out the body, remove the pivot bolt and pin.
FIGURE 1-46. Pivot bolt, pin and pillow block
5. Use any safe lifting device to safely lift the roof high enough to clear the pillow block
area.
6. Once you gain access to the pivot mechanism inside the block from the same side
you removed the pin, remove the snap ring and then the pivot.
1.6.14

Adjusting the Loading Bucket Cylinder Cushion

This feature aims at providing cushioning at the end of the extension and retraction
cycles of the cylinder and to assist in the unloading of the bucket when it reaches the
raised position.
To adjust the loading bucket cylinder cushion:
1. Ensure that the parking brake is applied and the vehicle is tagged out for
maintenance purposes. Refer to
T
HIS PROCEDURE REQUIRES A MINIMUM OF TWO PERSONS
N : P
OTE ERFORM THIS PROCEDURE ALTERNATING AND TESTING ON BOTH CYLINDERS
1-52
B
OLT AND PIN
"1.3.5 Lockout/Tagout Procedure" on page
DANGER
.
Top Select Maintenance Manual
10.
.