Labrie Top Select Maintenance Manual page 43

Top Select Maintenance Guide
To replace or clean the rollers:
1. Perform the bucket swing out procedure, see
2. Rollers move freely so all you have to do is pull them to take them out.
FIGURE 1-29. Sliding out the rollers
3. If you are planning to keep the rollers, first wash them with solvents in a small-parts
washer.
FIGURE 1-30. Parts Washer
4. Take advantage of this to clean out all the old lubrication on the shaft of the roller,
using a rag damped in solvent.
5. Install the new roller.
6. Refer to the last step of the bucket rollers swing out procedure.
1-38
section 1.6.2 on page
Top Select Maintenance Manual
36.