Labrie Top Select Maintenance Manual page 28

General Cleanliness
1. Apply suggested Lockout/Tagout procedure. For a Top Select with a Maximizer, go
to section 2.1.1 on page
2. Start the truck's engine.
3. Open the tailgate enough to set the safety prop in place.
FIGURE 1-12. Tailgate safety prop
4. Set the tailgate safety prop.
5. Lift the body about twelve (12) inches to help the water evacuate.
6. Bring up the loading bucket(s) to open the roof.
7. Install loading bucket safety pins.
8. Stop the truck's engine and remove key from the ignition.
9. Starting from the cab, clean the first partition.
10.Using a shovel and a broom, remove as much residues as possible.
11. Use pressurized water to clean the rest.
12.When the first partition is clean, release its locks to help the water evacuate. See
section 1.7.7 on page
13.Clean the second section and release the locks, and so on until you reach the
tailgate.
14.Lower the body.
15.Clean all the exterior with water and soap.
16.Rinse.
Top Select Maintenance Manual
B D C
ODY AILY LEANING
3.
65.
P
ROCEDURE
1-23