Body Safety Prop - Labrie Top Select Maintenance Manual

Top Select Maintenance Guide
1. Apply the parking brake.
2. Turn off the pump switch on the console (PTO switch).
3. Turn off the engine.
4. Remove the key from the ignition switch.
5. Put the key in a safe controlled area.
6. Put adhesive tape on the ignition switch keyhole.
7. If installed, turn off the master switch.
8. Put an "OFF SERVICE" tag on all steering wheels.
9. Put an "OFF SERVICE" tag on the windshield.
10.Block any system that could move by gravity with a proper and visible safety prop
(open tailgate, raised body, etc.).
11. Release any residual pressure in the hydraulic and pneumatic system.
12.Block wheels on both sides to prevent movement of the vehicle.
13.Disconnect the following items if any type of welding is required.
Batteries
•
ABS module (anti-lock brake system)*
•
Electronic transmission (ECU)*
•
Electronic engine module (ECM)*
•
Intermittent wiper module*
•
* Refer to the chassis manufacturer service manual to locate electronic components.
1.3.6

Body Safety Prop

To install the body safety prop:
1. Lift the body until the safety prop is clear to be tilted under the body.
2. Pull the handle to release the safety prop, then pull down the safety prop.
1-12
S L
UGGESTED OCKOUT
Figure 1-2, on page
/T P
AGOUT ROCEDURE
11.
Figure 1-3, on page 11.
Top Select Maintenance Manual