14 Safety
Summary of Daily Maintenance
There are basic steps to be performed daily in maintaining your T
necessary maintenance operations are presented further on in this guide. You must first be familiar
with all the precautions outlined in this manual before going any further.
When a T
S
OP
1.
Apply the Lockout/Tagout procedure (see Lockout/Tagout Procedure on page 22).
2.
Perform daily cleaning by following the instructions in section General Cleanliness on page 27.
3.
Perform the daily inspection as instructed in the Operator's Manual.
If anything wrong comes up, perform a visual inspection (refer to "Monthly Visual Inspection"
on page 33).
4.
Carry out the necessary maintenance operations following the visual inspection.
5.
Review the preventive maintenance chart and perform any due care.
6.
If any issue has been reported as wrong, go through the troubleshooting chart to fix the problem.
Safety Features
Safety Kits
A first aid kit and a triangle kit are provided with the truck.
Safety Decals
Pay careful attention to all safety and warning decals while operating/working in and around your
T
S
™ unit. Keep your decals clean and in good condition at all times. For replacement decals,
OP
ELECT
either individual or complete decal kits, call LabriePlus at 1-800- 231-2771 in the U.S. or 1-877-831-
8250 in Canada, and order using the part numbers as printed on the bottom of the decal. Bilingual
decals are available in English/Spanish or English/French versions.
See your Top Select
familiarize yourself with those decals.
Body Safety Prop
Safety props ensure that heavy body parts will not move inadvertently.
Setting the Body Safety Prop
The body safety prop ensures that an empty body will not lower when you are working underneath it.
DANGER!
Always set the body safety prop when performing maintenance underneath a raised body.
Failure to do so may result in severe injury, or even death.
™ unit is brought in for daily maintenance, you must:
ELECT
TM
Operator's Manual for a list of decals that are used on the truck. Be sure to
S
™ unit. Any other
OP
ELECT
Need help?
Do you have a question about the TOP SELECT and is the answer not in the manual?
Questions and answers