Gateway Configura On > Locks > Import Assigned Lock; Gateway Configura On > Locks > Transfer Lock(S) To Another Gateway - Alarm Lock ArchiTech Series User Manual

Gateway Configuration > Locks > Import Assigned Lock
In the Gateway Configuration screen, click to highlight a Gateway, then click Locks > Import Assigned Lock. Upon selec-
tion, the Gateway Lock Table for the Account will be updated with data from the Gateway. Locks that are assigned to the
Gateway that are not in the Gateway Lock Table (in the DL-Windows database) will be imported / added to the DL-
Windows database. Though rare, this feature is typically used when a DL-Windows database has been corrupted, and
therefore requires an update from the Gateway.
Gateway Configuration > Locks > Transfer Lock(s) to Another Gateway
In the Gateway Configuration screen, click Locks > Transfer Lock(s)
to Another Gateway. IMPORTANT: This option is currently
only available when using a USB Gateway (AL-IME-USB) and is
used to selectively transfer locks already assigned to the USB Gate-
way to a Networx Gateway. There are many potential uses for
this feature, but it is especially useful in situations where you wish to
take advantage of the benefits of both a Networx Gateway and a
USB Gateway.
To transfer locks from the USB Gateway to a Networx Gateway:
1. In the top window of the Lock Transfer screen, use the check-
boxes to select the desired lock(s) you wish to transfer.
2. In the bottom window of the Lock Transfer screen, click the
radio button to select the "Destination Gateway". Only one
Gateway can be selected for each operation.
3. Click the Transfer button. Note: This lock transfer operation
may take some time; please be patient!
A confirmation popup will appear when successful:
Note that the above popup optionally allows you to verify the
results of the transfer operation. Click Yes to verify the opera-
tion by opening the Gateway's Lock Table, or click No to close
the popup and continue without viewing the Lock Table.
For complete migration of all locks on the USB Gateway to a
new Networx Gateway, select Gateways > Replace Gateway
with New One (for more information about this feature, see
page 18).
DL-WINDOWS™ for Networx™ V5 USER'S GUIDE
31