Wireless Actions Menu - Alarm Lock ArchiTech Series User Manual

In the DL-Windows "Main Screen", click Wireless Actions:
Set Clock on All Locks
Based upon the current time and date of the PC running DL
-Windows, a command is sent to all Gateways (and
Expanders) to update all locks with this current date and
time. Note: Locks not Linked will not receive this update
command.
Emergency
Opens the Emergency Commands screen.
information about the Emergency Commands screen, see
page 42 and page 43.
Update Status of All Locks
A command is sent to all Gateways (and Expanders) in the
Account to request the current status for all assigned
wireless locks. Status data received from each lock
updates each Gateways Lock Table. When the Lock Table
of the Gateway is subsequently viewed, the Table displays
40

Wireless Actions Menu

For more
the information as of the latest update request.
Note: To view the Gateway Lock Table, in the Gateway
Configuration screen, select Gateway, then click Locks
> View Gateway's Lock Table (see page 28).
Wireless Schedule
Opens the Wireless Schedule
programming automatic scheduled communication with
wireless lock(s). See page 39 for more information.
Use USB Gateway Only
Upon selection, all communications to the Networx locks in
the Account are routed through the USB Gateway
(regardless of the Network Gateway to which the
lock may have been assigned). Note: The above is
denoted by a USB "stick" icon displayed at the
bottom of the DL-Windows screen (shown at right).
IMPORTANT: This selection is not available (grayed-
out) if version 2 Gateways exist in the Account.
DL-WINDOWS™ for Networx™ V5 USER'S GUIDE
screen. Used for