Gateway Configura On > Locks > Manually Add A Lock By Serial Number - Alarm Lock ArchiTech Series User Manual

Gateway Configuration > Locks > Manually Add a Lock by Serial Number
In the Gateway Configuration screen, click to highlight a specific Gateway in the list, then click Locks > Manually Add a
Lock by Serial Number. Upon selection, the Add Lock Serial Number screen opens, where you can manually as-
sign a specific lock by serial number to a Gateway or Expander.
This screen is typically used to assign multiple locks without needing to perform the discovery process. Manually
type the serial number of the lock(s) and select their corresponding models from the Lock Type pull-down, then click Add
Lock. Each lock, in succession, will be entered into a Configuration Table. When finished adding locks, you must
manually send the Configuration Table to the Gateway by clicking Gateways > Send Config Table to the Gateway. Note:
Remember to Link your locks after sending the Configuration Table.
Serial Number
Carefully type the lock's unique 8-character factory serial
number located on the lock housing (each Networx lock is
identified in DL-Windows by this unique number). Type all
characters of the serial number, do NOT include dashes or
spaces.
Lock Type
Click the Lock Type pull-down and select the corresponding
wireless lock model ("DL6100", "PDL6100", etc.).
Assign To
(not displayed for non-version 2 Gateways)
Manually assign a specific lock serial number(s) to a
selected Gateway or Expander (click the pull-down and
select the desired Gateway or Expander).
30
Add Lock (button)
Click to manually add the lock to the Gateway (Serial
Number plus Lock Type). The following message will
display:
We recommend that when installing
TIP
the lock on the door, a yellow-colored
"LOCK ID CARD" (see image below) be
completed. These yellow cards are a useful
way to organize lock information, including lock
serial numbers.
~ LOCK ID CARD ~
When installing lock, please fill in all information on
this card. This information will be used when
adding network locks to DL Windows. Keep this
card in a safe place. Do not discard!
L M _________________________________
OCK ODEL
F S N
ACTORY ERIAL UMBER
I L ___________________________
NSTALLED OCATION
_________________________________________
DL-WINDOWS™ for Networx™ V5 USER'S GUIDE
ALARM LOCK
_______________________
OI353 10/08