Gateway Configura On > Gateways > View Gateway Status - Alarm Lock ArchiTech Series User Manual

Gateway Configuration > Gateways > View Gateway Status
In the Gateway Configuration screen, click to highlight a specific Gateway in the list, then click Gateways > View Gateway
Status. Upon selection, the Gateway Status is retrieved and displays the operational status of the selected Gate-
way. In addition, if Expanders have been added to the Gateway, their status will also be retrieved and displayed. Note:
This screen appears automatically after updating Gateway or Expander firmware.
Description
Displays the text of the Description field from the Gateway
Configuration screen. Default = " New Gateway" .
IP Address
Displays the network address currently assigned to the
Gateway.
Firmware Version
Displays the current firmware edition (or "release") the
Gateway is running.
Firmware Update
Indicates the result of the last Gateway firmware upgrade
process. "Good" signifies that the last firmware upgrade was
completed without errors. "Bad" signifies the last firmware
upgrade was completed unsuccessfully. See Gateways >
Update Gateway Firmware on page 20 for more
information.
Security Code (" Security Password" )
Indicates the status of the Security Password by comparing
the Security Password in the Gateway with the Security
Password in DL-Windows. If Passwords are not identical,
the field indicates "Security Mismatch", thus disabling DL-
Windows-to-Gateway communications.
Lock Communication Error
Indicates if locks assigned to the selected Gateway
previously failed to communicate with that Gateway.
If "Communication Error" appears in this field, a lock
communication failure was detected. Click Locks > View
Gateway's Lock Table to determine which lock failed to
communicate.
Status
Displays the current state (or condition) of the Gateway.
Indicates status such as "Normal" to indicate a normal
condition; "Emergency Lock Down" if an Emergency Lock
Down Command was sent; and "Emergency Passage" if an
Emergency Passage Command was sent.
Expander(s)
(table not displayed for non-version 2 Gateways)
This table displays the Description, Firmware version and
latest Status of the Expanders added to the selected
Gateway. Each time the Gateway status is updated, this
table is also refreshed.
Last Updated
Displays the date and time of the latest Gateway status
update (the last time the Gateway Status was retrieved).
DL-WINDOWS™ for Networx™ V5 USER'S GUIDE
Update (button)
Click to request an updated Gateway / Expander status from
the Gateway. All fields will be refreshed upon Gateway status
retrieval.
19