Wireless" Screen - Field And Button Definitions - Alarm Lock ArchiTech Series User Manual

"Wireless" Screen - Field and Button Definitions

As described in Method 2 of the section Communicating with Wireless Locks (page 36) , the Wireless screen allows communica-
tion with individual or multiple wireless locks. The Wireless screen can be configured for various functions, as required. Functions
include Send Profile, Receive Log, and Send Profile & Receive Log.
Click the Wireless button to access the Wireless screen.
Wireless Configuration (pull-down)
Click pull-down to select and display
wireless configurations (the selections
made in this screen will be saved as a
"Wireless Config").
Enable
When checked, upon communi-
cation, the Function pro-
grammed for the enabled wire-
less lock will be performed. See
Right Click Menus below for
programming short cuts availa-
ble.
Start
Click to initiate communications
to all enabled wireless locks.
Right Click Menus
Enable (right-click menu)
To save time, right-click the "Enable" column; the desired action can be selected as follows:
●
Select All: Adds a check to enable all (Linked) wireless locks.
●
Unselect All: Removes a check from all (Linked) wireless locks.
●
Select Highlighted: Adds a check to the Enable checkbox for all highlighted rows.
●
Invert Highlighted: Removes a check from the Enable checkbox for all highlighted rows.
Function (right-click menu)
To save time, right-click the "Function" column; the desired action can be selected as follows:
●
Change All to: "Receive Log"; "Send Profile"; "Send Profile & Receive Log" : Selects function for all (Linked) wireless locks.
●
Change Selected: "Receive Log"; "Send Profile"; "Send Profile & Receive Log" : Selects function for all enabled wireless locks.
●
Change Highlighted to...: "Receive Log"; "Send Profile"; "Send Profile & Receive Log" : Selects function for all highlighted wireless locks.
38
Lock Information
Displays Lock ID, Lock Profile and Lock
Type (model) of the wireless lock. Note:
Non-wireless locks (i.e. PDL3000) will not
be displayed in this screen.
Function (pull down)
Click to display a pull-down and select a function to
perform upon communication.
●
Send Profile: Sends full lock program to the
wireless lock (Users, Schedules, Features, time/
date).
●
Receive Log: Retrieves the Event Log (Audit
Trail) from the wireless lock.
●
Send Profile & Receive Log: Combines the
above two functions.
See Right Click Menus below for programming short
cuts available.
+ Add
Click to add additional
Wireless Configurations.
Close (button)
Click to save settings and exit the screen.
Print
Click to open a "Print Preview" screen,
displaying all information in the Wireless
screen. Click the "Printer" icon to send
the request to your default printer.
DL-WINDOWS™ for Networx™ V5 USER'S GUIDE
Clear
Click to clear the selected (checked)
Wireless Configuration. Note: Also
clears last-known communication
condition (see Status).
Delete
Click to remove the selected
Wireless Configuration.
Status
Displays current state of the link
between the Gateway and the lock
("Linked" or "Not Linked"). Note:
"Not Linked" locks are highlighted
in red. This field also displays the
last-known lock communication
condition and is updated upon
subsequent communications.