Gateway Configura On > Gateways > Signal Test Mode; Gateway Configura On > Locks > Discover Locks - Alarm Lock ArchiTech Series User Manual

Gateway Configuration > Gateways > Signal Test Mode
In the Gateway Configuration screen, click to highlight a specific Gateway in the list, then click Gateways > Signal Test
Mode. Upon selection, the Gateway Signal Test screen opens (shown below) where you can set the duration of
time (minutes) the Gateway (or Expander) will continuously generate a signal to the AL-NSM Networx Signal Meter
(required). For new and existing installations, this option is used to perform a site survey test of the premises to help you
find the optimum location for Gateways relative to the door locks or Gateways relative to Expanders. This helps to deter-
mine the optimum number of Gateways or Expanders needed to cover the number of locks you plan to install. IM-
PORTANT: This feature will only operate with Gateway firmware version 3.88 or later.
Test time in minutes
Click the pull-down menu to select the time (in minutes) the
Gateway will generate a signal to the AL-NSM (Networx
Signal Meter). 1 - 30 minutes can be selected (default is
30 minutes).
Send To:
(not shown for non-version 2 Gateways)
From this pull-down list, select the Gateway or Expander to
generate a signal to the AL-NSM Networx Signal Meter.
Start (button)
Click to initiate the test signal generation from the selected
Gateway or Expander to the AL-NSM (Networx Signal
Meter), for the time selected. Note: A countdown (time
remaining) will display (see image below right). Notice that
the Start button changes to an Abort button that can be
clicked to cancel the test signal generation.
Abort (button)
The Start button changes to this Abort button. Click Abort
to cancel the test signal generation to the AL-NSM
(Networx Signal Meter).
Gateway Configuration > Locks > Discover Locks
In the Gateway Configuration screen, click to highlight a specific Gateway in the list, then click Locks > Discover Locks.
This option is identical in operation to the Discover Locks button found in the Gateway Configuration screen. See page 14
for more information about discovering wireless locks.
DL-WINDOWS™ for Networx™ V5 USER'S GUIDE
27