Right-Click Menu > View Status Of Lock - Alarm Lock ArchiTech Series User Manual

Right-Click Menu > View Status of Lock
In the Account List area, click to highlight a Lock Profile, then right-click and select View Status of Lock from the menu that
appears. Upon selection, the Lock Status is updated and retrieved, and displays various attributes of the selected lock.
Note: Lock must be Linked to a Lock Profile in order to view the Lock Status screen.
Lock Description
Displays the name of the selected Lock Profile.
Lock Type
Specifies the model of the Trilogy Networx
device, such as "PDL6100", "DL6100" or "PL6100".
Serial Number
Displays the lock's unique serial number assigned and pro-
grammed into the lock firmware at the factory. Each Networx
lock is identified in the system by this unique serial number.
Gateway
Displays the name of the Gateway to which the selected
physical lock is assigned. Note: Lock Assignment to an
added Expander is not displayed here. To view the Ex-
pander to which the lock is assigned, click Gateway Config-
uration > Locks > View Gateway's Lock Table.
IP Address
Displays the IP address of the Gateway to which the physi-
cal lock is assigned.
GTW Rx
Indicates the radio transmission strength, as measured be-
tween the Gateway / Expander to the physical lock. A high-
er number indicates stronger signal.
LCK Rx
Indicates the radio transmission strength, as measured be-
tween the physical lock to the Gateway / Expander. A high-
er number indicates stronger signal.
Firmware Version
Indicates firmware source code edition of the selected
physical lock.
Battery
Displays the status of the battery powering the physical
lock. If battery status cannot be retrieved, "Unknown" will
be displayed.
Lock Status
Indicates the latest condition of the physical lock (i.e.
"Locked", "Passage", etc.). If status is unknown or unable
to be retrieved, "Communication Error" will be displayed.
Communication Status
Indicates the integrity of the communication link between
the physical lock and the Gateway / Expander. If status is
unknown or unable to be retrieved, "Communication Error"
will be displayed.
50
series locking
™
Last Updated
Displays the date and time of the latest lock status update.
Update (button)
Click to request an updated lock status from the physical
lock. All fields will be refreshed upon lock status retrieval.
DL-WINDOWS™ for Networx™ V5 USER'S GUIDE