Gateway Configura On > Expanders > Update Expander Firmware; Gateway Configura On > Expanders > Send Expander Config Table To The Gateway - Alarm Lock ArchiTech Series User Manual

Gateway Configuration > Expanders > Update Expander Firmware
In the Gateway Configuration screen, click to highlight a specific Gateway in the list (with the Expanders you wish to up-
date), then click Expanders > Update Expander Firmware.
Upon selection, the standard Windows Open dialog box
appears (shown at right), allowing you to browse for the
binary ".bin" file containing the Expander firmware.
Select Expander firmware file, then click Open to initiate
the update process.
DL-Windows will check the integrity of the firmware, will
send it to the Gateway, then distribute the file throughout
the system (Gateway to Expander and Expander to Ex-
pander).
Be patient; the Expander firmware distribution process
may take several minutes. Upon completion, the Gate-
way Status screen automatically opens.
"Expander(s)" table at the bottom of the screen to
confirm the updated firmware version.
Gateway Configuration > Expanders > Send Expander Config Table to the Gateway
In the Gateway Configuration screen, click to highlight the desired Gateway from the list, then click Expanders > Send Ex-
pander Config Table to the Gateway. This feature is intended to be used in the rare instance that the Expander
Routing table becomes corrupted.
information stored in the DL-Windows database.
34
View the
The Gateway's added Expanders will be populated with the Expander Routing Table
DL-WINDOWS™ for Networx™ V5 USER'S GUIDE