Communicating With Wireless Locks - Alarm Lock ArchiTech Series User Manual

Communicating with Wireless Locks

Networx Communication Overview
Once your have discovered your Gateways (and/or
Expanders) assigned your locks and Linked them to Lock
Profiles, there are several methods for sending data to (or
receiving data from) wireless locks:
● Method 1: Communicate with wireless locks
individually using the Communication button on
Windows "Main Screen" (or from the Lock Data
screen);
● Method 2: Communicate with multiple wireless
locks (one after another) using the Wireless screen;
● Method 3: Communicate automatically at a
specified time using a Wireless Schedule screen
action.
Note: Keypad programming of User Codes, Features,
Time Zones, and Schedules is available as a temporary
convenience to allow the lock to be put into use before
installing and configuring a wireless network. Therefore, all
lock programming added via the keypad cannot be
retrieved from the lock into DL-Windows. If you decide to
start programming your wireless lock via the keypad, we
recommend you keep hardcopy records (in a secure
location) of all Users, their User Codes, and any proximity
cards that may have been programmed. Keeping complete
and accurate records saves time because after the wireless
network is set up, any programming added via the keypad
must be re-added to DL-Windows and downloaded back to
the lock(s).
Method 1:
"Communicate with Selected Networx Lock"
1. In the DL-Windows
Communication button on the toolbar and select
Communicate with Selected Networx Lock.
Note: The Communication button on the Lock Data
screen may also be used. In addition, if your lock has
not been Linked to a Lock Profile, the following popup
appears:
DL-WINDOWS™ for Networx™ V5 USER'S GUIDE
the DL-
"Main Screen", click
2. If Linked, the following screen appears:
Select any combination of data to send to your wireless
lock; a red circle with red square will denote those
selections made, though it is recommended to check
"Send/Receive All".

Send/Receive All - Sends the complete program
(and receives selected number of Event Logs from)
the wireless lock.
 Send Users - Sends all User Information including
User Enable / Disable status, User Codes (PINs),
proximity
Emergency Users.
 Send Schedules - Sends all Schedules (see OI382
for more details).
 Send Features - Sends all Features chosen in the
Features screen (see Features section(s) in OI382
for more details).
 Send Date Time Update - Updates the wireless lock
with the PCs current date and time.
 Receive Number of Event Logs (pull-down) -
Receives the selected number of Event Logs from the
wireless lock (default = 50; maximum = 40,000).
the
3. Initiate the communication by clicking the Start button.
Note: Unlike standard non-wireless Trilogy locks,
wireless Networx locks do not need to be configured for
PC Program Mode (Function 58).
information, Group Assignments
Any
combination
of available
data may be
sent to your
lock.
to
and
35