Gateway Configura On > Gateways > Set Gateway Groups; Gateway Configura On > Gateways > Import Gateway And Assigned Lock(S) - Alarm Lock ArchiTech Series User Manual

Gateway Configuration > Gateways > Set Gateway Groups
In the Gateway Configuration screen, click Gateways > Set Gateway Groups.
For information about setting Emergency Grouping, see the section "Using Emergency Commands" on page 42.
Gateway Configuration > Gateways > Import Gateway and Assigned Lock(s)
In the Gateway Configuration screen, after using the Discover New Gateways feature, select an "Available" Gateway, then
click Gateways > Import Gateway and Assigned Lock(s). This feature is used to rebuild a DL-Windows database by
importing existing Gateway, Expander (if applicable) and lock configuration data.
When the Account information stored in DL-Windows is lost
(such as with a stolen laptop)--AND--the DL-Windows back-
up files are either non-existent, inadequate or lost, the
above "Import" option can be used.
Once you have successfully re-created pertinent data
(Accounts, Lock Profiles, Global Users, etc.), the following
steps may be used to recreate your wireless system. Note:
To successfully restore your wireless system, you MUST
know the existing Security Password previously set for the
Gateway and locks.
1. In the DL-Windows "Main Screen", click Tools > Set
Security Password.
2. Type the Security Password that was previously set for
the Gateway and locks you wish to import (see page
11 for more information regarding Security Pass-
words).
3. Click the Gateway Config icon to open the Gateway
Configuration screen.
24
4. Click Gateways > Discover New Gateway(s). The
Gateway(s) appear in the Gateway Configuration
screen (IP address highlighted in green color; Status =
"Available").
IMPORTANT: Do NOT select Gateways > Add
Gateway to Account.
5. Click to highlight the Gateway you wish to import from
the list.
6. Click Gateways > Import Gateway and Assigned
Lock(s).
The Gateway will be added to the system; the Expander
Config Table (if applicable) and the Lock Configuration Ta-
ble will be imported and written into the DL-Windows data-
base.
DL-WINDOWS™ for Networx™ V5 USER'S GUIDE